---
# Device facts (recorded on-site 2026-06-08):
#   model:  CRS310-8G+2S+IN
#   serial: HM40B8TDNDD
#   base MAC (ether1): D0:EA:11:24:F4:AA
#   RouterOS: 7.19.6 stable (bootloader already current) -> pinned target below
#
# Bootstrap status (2026-06-08): identity set; user `sjat` (full) created with the
# operator ed25519 key imported + a vaulted password (vault_switch_admin_password in
# group_vars/mikrotik.vault.yml). Key login verified. Default `admin` still enabled
# (not yet hardened). Switch currently on the bench at 192.168.88.1 (defconf, not yet
# reset/VLAN-configured). Real mgmt addressing below is the FUTURE production plan.
# Day-2 connection: key auth as the named admin user (overrides the bootstrap
# default ansible_user=admin in group_vars/mikrotik.yml).
ansible_user: sjat

switch_identity_name: "crs310-maker"
switch_mgmt_vlan_id: 99
switch_mgmt_address: "10.0.99.2/24"      # EDIT: real mgmt IP
switch_mgmt_gateway: "10.0.99.1"         # EDIT: real gateway
switch_dns_servers: "10.0.99.1"
switch_ntp_servers: "10.0.99.1"

switch_admin_user: "sjat"

# PLACEHOLDER VLAN/port topology — vlans.yml is correct mechanism, but these IDs
# and the per-port map are NOT the real makerspace plan. Replace with the real
# VLAN ids + full ether1-8/sfp map before any on-site VLAN run. Notes:
#   - mode: access  -> untagged member of `pvid`; mode: trunk -> tagged member of
#     each id in `tagged_vlans`, with `pvid` as the native (untagged) VLAN.
#   - trunk pvid: 1 means untagged frames on the uplink land in VLAN 1 (unused in a
#     hardened design). Decide deliberately whether the uplink should carry any
#     untagged traffic; set pvid to an intended native VLAN or leave 1 as a dead end.
#   - the bridge (CPU) is tagged ONLY on switch_mgmt_vlan_id (see vlans.yml).
switch_vlans:
  - {id: 99, name: "mgmt"}
  - {id: 10, name: "members"}
switch_bridge_ports:
  - {interface: "ether1", pvid: 10, mode: access}
  - {interface: "ether2", pvid: 10, mode: access}
  - {interface: "sfp-sfpplus1", pvid: 1, mode: trunk, tagged_vlans: [99, 10]}

# Firmware: pinned at the version already installed (no upgrade planned now).
switch_firmware_target: "7.19.6"
# switch_firmware_enabled: true   # opt-in only when you actually want to upgrade