MakerFLOSS/docs/hardware/shf02.md

---
hostname: shf02
kind: shelf
status: in-use
rack: rack01
rack_u: 35
u_height: 1
rack_face: both
---

## Notes

- 1U full-depth tray at U35. Tower PCs stand on it and rise above U35; they are
  not rail-mounted, so the U's above are not consumed in the rack model
  (e.g. pdu03 sits at U34, just above this shelf).
- Front: srv07 (6U, U30–U35), srv04 (6U, U30–U35).
- Rear: srv05 (7U, U29–U35), srv06 (7U, U29–U35).
-												docs(hardware): reconcile rack01 to as-mounted layout and document cabling

Rebuild rack01 from the physically remounted hardware:
- Correct stale positions/ports/outlets for pp01, pp02, sw01, pdu01-04
- Model shelves as 1U trays (towers stand above without consuming rack U's);
  add shf02 and empty half-depth shf03/shf04
- Add ups01/ups02; reseat nas01/02 and sw02-05; move srv04-07 onto shf02
- Add `wan` hardware kind; add WAN demarcation hosts wan01 (active) and
  wan02 (staging)
- Document full live network wiring: srv01-07 -> pp02 -> sw01 (LAN) and
  srv01 eth0 -> pp02 -> pp01 -> wan01 (WAN); keep non-active lines
  (wan2, working-table patches, sw01 mgmt) in notes only
- Regenerate hardware index + rack01 elevation/network/power artifacts

Also includes the in-progress generator updates (gen_rack.py, gen_overview.py,
Makefile, tests) that the regenerated artifacts depend on.

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>

											
										
										
											2026-06-30 21:31:48 +02:00
+								---
 								hostname: shf02
 								kind: shelf
 								status: in-use
 								rack: rack01
 								rack_u: 35
 								u_height: 1
 								rack_face: both
 								---
 								## Notes
 								- 1U full-depth tray at U35. Tower PCs stand on it and rise above U35; they are
 								  not rail-mounted, so the U's above are not consumed in the rack model
 								  (e.g. pdu03 sits at U34, just above this shelf).
-												feat(rack): draw shelf-mounted tower heights in the elevation

Add an optional `chassis_u` field for shelf-mounted devices (their height
in U where they stand on the shelf) and render it:
- gen_rack draws each tower chassis_u U's tall, rising above the 1U shelf
  line; rail-mounted devices now paint on top so a PDU within a tower's
  span (e.g. pdu03 over srv05/06) stays visible
- occupancy table shows each tower's real U-span (e.g. srv01 U37-U46)
- validate_item checks chassis_u is a positive integer; absent chassis_u
  renders byte-identically to before
- set chassis_u for srv01-07 (10/8/6/6/7/7/6U); document the field in the
  editing guide; regenerate rack01 artifacts

Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>

											
										
										
											2026-06-30 22:11:19 +02:00
+								- Front: srv07 (6U, U30–U35), srv04 (6U, U30–U35).
 								- Rear: srv05 (7U, U29–U35), srv06 (7U, U29–U35).